
Interview with Des Forde - NeraTek
Footage of a recent interview that took place at the National Sciences and Engineering Expo in Mullingar. Neratek specialises in 3D Printing, 3D Scanning, 2D & 3D CAD Services, Reverse Engineering and Project Management. We are located in Sligo, Ireland which is fitting, given our locations deep association with Mould Making and Moulding. 3D Printing (aka Additive Manufacturing) is the next phase in this manufacturing cycle. #DirectDigitalManufacturing #LaserSintering #Stereo

Going to the National Life Sciences & Engineering Expo 2017..... So are we....Stand K7
NeraTek will exhibit at this years National Life Sciences and Engineering Expo in June. This exciting 2 day event (15th & 16th June) is taking place again in the Mullingar Park Hotel, Mullingar, Co Westmeath. #DirectDigitalManufacturing #LaserSintering #Stereolithography #DirectMetalLaserSintering #PolyJet #2DCADDrawing #2DCAD #FDM #3DSolidModel #DMLS #3DCAD #Prototypes #ProjectManagement #3DPrinting #3DPrint #3DPrototyping

Why limit yourself to a few words.......
Neratek 3D Printing, Design. 3D Scanning and Project Management word collage

NeraTek Exhibits at Engineering Expo 2017
We kindly invite you to visit NeraTek at the Engineering Expo in Knocknarea Arena, IT Sligo on Thursday, May 4th, 2017. This years Engineering Expo is an interactive, information sharing event which is a new and exciting collaboration between IT Sligo and Industry. Hope to see you there!! #DirectDigitalManufacturing #LaserSintering #Stereolithography #DirectMetalLaserSintering #2DCADDrawing #PolyJet #2DCAD #FDM #3DSolidModel #DMLS #3DCAD #Prototypes #3DPrinting #ProjectMana

NeraTek Exhibits at IOM Polymer Seminar
Seminar and Exhibition is for professionals in Ireland's Plastic Industry

NeraTek Exhibits at Engineering Expo 2017
This years Engineering Expo is an interactive, information sharing event which is a new and exciting collaboration between IT Sligo and Industry. It is a chance for potential engineering students to gain knowledge of companies, interact with alumni and network with professional engineers. Participants at the Engineering Expo include Fortune 500 industry leaders, indigenous industry, and small and medium size companies from across Ireland. Date: Thursday 4th May, 2017 Time: 10

Join NeraTek at The National Manufacturing & Supply Chain Conference & Exhibition 2017
NeraTek is exhibiting RapidPrototyping and Additive Manufacturing at the National Manufacturing & Supply Chain Conference and Exhibition

What are the limits to how small a diameter hole or shaft (post) can be successfully 3DP. NeraTek wo
What's the smallest diameter hole or post that can be successfully 3D Printed

3D Printing diameter holes and posts, what are the limits to whats possible.
Welcome Back! In this the second blog in the series on 3D Print Design tips, we are going to challenge what is the minimum diameter hole than can be successfully 3D Printed, we will also check out what is the minimum shaft / post diameter that is printable. In both instances, we will be using our Objet-Polyjet 3D Printing technology. In early 2017 NeraTek intends carrying out all the experiments that we will have conducted and reported on using the Polyjet process, but instea

Continuing on from the question regarding minimum wall thickness that can be successfully 3D Printed
As you can see both test pieces printed perfectly. I was careful with the removal of the support material during both the water jet cleaning and when finishing off the cleaning with the small brush. I guess the main reason for having to be careful with the thinner wall sections (0.3mm to 0.6mm) was due to the fact that the gap that exists between walls were only 5mm, so sometimes when accessing the inner side walls with the brush I would have to slightly push the other wall a