Please reload

Follow Us

Welcome Back! In this the second blog in the series on 3D Print Design tips, we are going to challenge what is the minimum diameter hole than can be successfully 3D Printed, we will also check out what is the minimum shaft / post diameter that is printable. In both ins...

As you can see both test pieces printed perfectly. I was careful with the removal of the support material during both the water jet cleaning and when finishing off the cleaning with the small brush. I guess the main reason for having to be careful with the thinner wall...

This is an interesting question; one I get asked often. There is a second part to this question, and that is, if the wall has draft on it, like you might find on a container, tub or box, etc.

These questions and ones like them I intend to challenge every couple of weeks...

7 Sep 2016

Welcome, we are excited to share with you the announcement that we have just launched our new website, both for desktop and mobile. You can visit us at www.neratek.com. We hope you find the website fast, easy to navigate, user friendly, and above all relevant to you ne...

Please reload

  • Facebook Basic Square
  • LinkedIn Social Icon
  • Twitter Basic Square
Please reload

Recent Posts
Search By Tags
3D Printing
Prototypes
3D Scanning
2D & 3D CAD Services
Reverse Engineering
Additive Manufacturing
Project Management

I'm busy working on my blog posts. Watch this space!

Please reload

Archive
Please reload

© NeraTek Limited is registered in Ireland, No. 588438. Registered Office: Glenview, Grange, Co. Sligo, F91 E3Y9, Ireland